Gorilla Heavy Demolition Tools Accessories
Gorilla Goo (Chisel Paste)
Lubricating
the demolition tool and wear bushings may be the single most
important maintenance item on any make of hydraulic hammer.
Extreme temperatures and moment loads dictate the need of
a lubricant robust enough not to melt and substantial enough
to resist vibrating down the shank of the tool during operation.
To fulfill the above mentioned requirements, Gorilla offers a lubricant called Chisel Paste.
Chisel paste is a high temperature, moly-based, open gear type lube. It contains graphite and
copper particles to provide superior wear resistance between the tool and wear bushings. This
lubricant is designed for use in hammers only, and should not be used on any other type of
equipment as damage may result.
- Formulated for extreme temperatures and applications
- Available in various quantities and containers
Gorilla
Carrier Mounted 24 Volt Auto-Lubrication System
Single-line progressive automated lubrication system for grease and oil.
Most hammers drills require lubrication at least every two hours.
Failure to provide adequate lubrication to the tool bushing
point(s) can ruin a new hammer in one day. Because our pump
can deliver continuous lubrication while the breaker is
in operation, the equipment operator can concentrate more
on being productive rather than worrying about greasing
the hammer. He no longer has to shut the hammer down every
couple of hours to grease it. In Gorilla's Auto-Lubrication
System, lubricant can be supplied either manually, with
a grease gun, or through a fully automated system using
electric or pneumatic pumps and progressive metering valves.
More than a drilled manifold block, the SSV metering valve
incorporates a series of metering pistons, which accurately
dispense lubricant from each outlet. Visual monitoring is
provided with an indicator pin, which confirms a valve has
completed a full cycle.
- Designed to provide a relatively simple and inexpensive method of centralizing or automating the lubrication process
- Electrical pumps are vibration resistant and shock resistant for use on mobile equipment
- Solid block-type SSV metering valves will not leak under pressure
- 24 volt models that work with all electrical refills
- Pumps either NLGI #2 grease or oil to -13°F
- Can lube up to 300 points and three separate systems
- Versatile (with or without low-level control, printed circuit
boards, microprocessors)
- Compact design to install in tight spots
- Clear reservoirs for complete lubricant level visibility
- Built-in manual override switch
 |
- Pump
- Main metering device
- Return line
- Secondary metering device
|
SSV metering valves
 |
In action...
 |
Gorilla
Rod Protector - Save the SEAL!
This unique product is currently being utilized on many hydraulic
machines with great results! It is designed to be heat, chemical,
oil and water resistant. This product protects the seals and cylinders
which can result in less down time and fewer repairs. The Rod Protector
securely attaches to the rod and cylinder head using only a screwdriver.
No disassembly of the cylinder is required.
All Rod Protectors come with a one year
warranty on workmanship and materials.
- Simple to install - Less than fifteen (15) minutes with no
disassembly of the cylinder required
- Rugged - Resistant to water, chemicals, oils, heat and punctures
- Economical - Low in cost, long in life expectancy, with one
(1) year
warranty on workmanship and materials
- Available in Ballistic Nylon or Silicone-Coated Kevlar materials
To order Gorilla Rod Protector... |
|
 |
 |
To order Gorilla Rod Protector(s), please, fax or email order form:
HTML,
PDF.
- Machine description (make and model)
- Hydraulic cylinder application
- Dimensions (A, B, C, D, E, F, G, specify diameter
or circumference)
* If there is a grease zerk in the rod eye clevis, mark
the location and how far from the end of the rod it is located.
We will need to make a hole in the strap so advise how big
of a hole we need to allow access to the zerk.
Cylinder fully extended |
Cylinder fully closed |
|
Hydraulic Hammer (Rock Breaker) Manuals
We can help you to get manual for your hydraulic hammer. Check the list of the makes / brands below:
- ATLAS COPCO
- ALLIED
- BTI (TELEDYNE)
- OKADA
- PROMOVE
- RAMMER
| |
- ROCKBLASTER
- ROCKRAM
- STANLEY
- SOOSAN
- KENT
- MONTABERT / TRAMAC
|
We can help you to obtain manuals for other makes of hydraulic hammers (rock breakers).
If you don't see yours here - just ask.
|
